Console Setup; Overview; Setup Checklist - HP Integrity rx6600 Installation Manual

1. Obtain valid IP addresses for each LAN port you plan to activate.
2. Connect the LAN cable from an available LAN port to a live connection on the network.

Console Setup

Setting up the console involves the following:
1. Determining the physical access method to connect cables. There are two physical connections
to the Integrity iLO 2 MP:
RS-232 serial port
iLO 2 MP LAN port
2. Configuring the Integrity iLO 2 MP and assigning an IP address if necessary. Though there
are several methods to configuring the LAN, DHCP with DNS is the preferred one. DHCP with
DNS comes preconfigured with default factory settings, including a default user account and
password. Other options include:
ARP-Ping
RS-232 serial port

Overview

A console is a tool consisting of display and input devices used to locally and remotely monitor
and control the server. The console enables interaction with the following manageability,
configuration, and diagnostic tools:
Integrated Lights-Out 2 Management Processor (iLO 2 MP). Provides a way to connect to the
server and perform administration or monitoring tasks for the server hardware. It controls
power, reset, and Transfer of Control (TOC) capabilities; provides console access; displays
and records system events; and displays detailed information about internal subsystems. The
iLO 2 MP is available whenever the system is connected to a power source, even if the server
main power switch is turned off.
NOTE:
Guide.
Extensible Firmware Interface (EFI). Provides an interface between the operating system and
the firmware. Use the EFI to configure options, such as the server boot order, before the server
loads an operating system.
Table 9 lists the elements required to start a console session.
Table 9 Elements Required to Start a Console Session
Console Element
AC power (standby power)
Server hardware components
Console cable
Console device
Console emulation software

Setup Checklist

Use the checklist in
42 Installing the System
For more information on iLO 2, see the HP Integrity Integrated Lights-Out 2 Operations
Table 10 to assist you with the console setup process.
Description
The server must have AC power to provide console functionality.
See "Applying Standby Power to the Server" (page
Includes the iLO 2 MP and console cable connectors.
Links the server console to the console device.
Provides display and input functionality using components such
as monitors, keyboards, and mouse devices.
Emulates the output from the server console and displays the
output on the console device screen.
40).