Advanced Process Screen; Skin Color Adjust Screen; File Manage Screen - JVC GY-DV500E - Pal Professional Dv Camcorder Instructions Manual

12-7 ADVANCED PROCESS Screen

Item Function, Operation
COLOR Sets the color matrix
MATRIX OFF ...... Deactivates the color matrix function
ON ....... The color reproducibility is enhanced, but noise increases.
CAUTION:
During the LOLUX operation, COLOR MATRIX is fixed to the OFF
setting and "FIX" is displayed.
GAMMA Correction of the gamma curve to decide the reproducibility of black color.
• To enhance the black color reproducibility. However, halftones will be
lost for white section
............... Increase the number
• When reproducibility of the black color is not so important
............... Decrease the number
CAUTION:
• During LOLUX operation, "FIX" is displayed because GAMMA is fixed
at the MIN value.
SKIN COLOR Pressing the SHUTTER dial once when the cursor is at this position
ADJUST switches the screen to display the SKIN COLOR ADJUST screen.
PAGE BACK The PROCESS MENU returns when the SHUTTER dial is pressed with
the cursor at this position.

12-8 SKIN COLOR ADJUST Screen

Item Function, Operation
SKIN COLOR Sets whether it is possible to change the color used by the Skin Detail
DETECT function.
EXECUTE ...... Choose this setting to allow detection of the color used by
the Skin Detail function.
STOP ............. Choose this setting to stop detection of the color used by
the Skin Detail function.
See "Using the Skin Detail Function" on page 84.
SKIN COLOR The setting of this item can only be changed when the SKIN COLOR
RANGE DETECT item is set to EXECUTE.
This setting is for adjusting the skin color range where Skin Detail functions.
(When this item is selected, the area where the Skin Detail function is
applicable is indicated by zebra patterns on the screen.)
While viewing the zebra pattern range, perform the adjustment.
Increasing the range ........ Increase the number
Increasing the range . ...... Decrease the number
PAGE BACK The ADVANCED PROCESS MENU returns when the SHUTTER dial is
pressed with the cursor at this position.
For servicing
→
See the service manual page 1-17 "1.12 CHANGING THE COLOR MATRIX SETTING".
12. SETUP MENU
Variation Range Initial Setting
ON ON
OFF
MAX (8) NORMAL
7
17
gradations
to
NORMAL (0)
to
-7
MIN (-8)
– –
Variation Range Initial Setting
STOP STOP
EXECUTE
WIDE NORMAL
+19
(33 gradations)
to
NORMAL
to
-11
NARROW
– –
75
12. SETUP MENU

12-9 FILE MANAGE Screen

The unit has three files that can be used for storing camera menus. The FILE MANAGE screen is for performing the operations for
saving the set CAMERA MENU.
• When menu settings are made using SCENE FILE A or B, the contents of the settings will be invalid if the storage operations
are not performed on this screen. However, the SETUP MENU settings will be valid even if the storage operations are not
performed.
• When menu settings are made using SCENE FILE OFF, the contents are stored in the unit at the time settings are changed
on each menu screen even if the storage operations are not performed.
OPERATE/WARNING
LIGHT
RESET ON
OFF
MONITOR
SELECT COUNTER
FILTER
CTL
1 3200k ALARM TC
2 5600k UB
3 5600k+ND
SHUTTER STATUS
MONITOR
MENU
CH-1 AUDIO CH-2
LEVEL
AUTO IRIS FULL AUTO BLACK LOLUX
BACK L STRETCH
NORMAL NORMAL
SPOT L COMPRESS
NG POWER
ON OFF
2. 3. 4. 5.
1.
SHUTTER dial
STATUS button
SHUTTER
MENU
- - - CAMERA MENU - - -
SCENE F I L E : A
VF D I SP L AY MENU
OPERAT I ON MENU
PROCESS MENU
Cursor F I L E MANAGE
SETUP MENU
EX I T
CAMERA MENU screen
- - - F I L E MANAGE - - -
SCENE F I L E A
STORE F I L E : A
Cursor STORE
RESET F I L E : OFF
RESET
PAGE BACK
STORE OK ?
FILE MANAGE screen
76
Storage Operation
1.
Press the STATUS button for about 1 second to display the
CAMERA MENU screen.
2.
Turn the SHUTTER dial to align the cursor with the FILE
MANAGE item, and then press the SHUTTER dial in the
direction of the arrow.
• The FILE MANAGE screen appears in the viewfinder.
3.
Choose the file to save in (A or B).
1 Turn the SHUTTER dial to select the STORE FILE item,
and then press the SHUTTER dial in the direction of
the arrow.
2 Turn the SHUTTER dial to select the file to save in (A or
B), and then press the SHUTTER dial in the direction of
the arrow.
4.
Save the menu settings.
Turn the SHUTTER dial to align the cursor with the STORE
item, and then press the SHUTTER dial in the direction of
the arrow.
• The "STORE OK?" message appears in the lower section
of the centre of the screen.
When the SHUTTER dial is pressed in the direction of
the arrow once more, the menu settings are stored in
the selected STORE FILE.
5.
Close the FILE MANAGE screen
Turn the SHUTTER dial to align the cursor with PAGE BACK,
and then press the SHUTTER dial in the direction of the
arrow.
• The CAMERA MENU screen returns in the viewfinder.
Memo:
• When changing the menu settings in SCENE FILE A
and saving in STORE FILE B:
SCENE FILE B: The contents become the menu
contents of the changed settings.
SCENE FILE A: The contents become the menu
contents valid before the settings were changed.
• When changing the menu settings in SCENE FILE OFF
and saving in STORE FILE B:
SCENE FILE B: The contents become the menu
contents of the changed settings.
SCENE FILE OFF: The contents become the menu
contents of the changed settings.
Resetting the menu settings to the initial settings is also
done using the FILE MANAGE screen.
See "Resetting the Camera Menu Settings" on page 78.