Setting Menu Screens - JVC GY-HD110 Instructions Manual

MENU SCREENS

Setting Menu Screens

USER1 USER2 USER3 button
SHUTTER
dial
ND FILTER
2
1
OFF
Cursor Menu screen
TOP MENU screen
Item
VIDEO FORMAT menu screen
62
USER 1 USER 2 USER 3
SHUTTER
MENU
STATUS
WHT.BAL
AUTO AUTO
STATUS button
Setting
Make the settings while observing the LCD monitor or the
viewfinder screen.
If the OUTPUT CHAR. item on the OTHERS [1/2] screen is
set to ON, the menu screen can also be viewed on a monitor
connected to the video signal output connector.
1.
Set the POWER switch to ON.
2.
Set the mode of the GY-HD110 with the CAM/VTR button.
(Camera mode or VTR mode)
3.
Press the STATUS button for 1 second or longer.
• The TOP MENU screen appears.
4.
Select the menu screen to be set.
Rotate the SHUTTER dial to align the cursor (K) with the
menu screen to be set, and then press the SHUTTER
dial.
• The selected menu screen appears.
5.
Select the menu item on the menu screen.
Rotate the SHUTTER dial to align the cursor (K) with the
item to be set, and then press the SHUTTER dial.
• The setting area of the selected item starts blinking,
and the setting can now be made.
6.
Change the setting.
Rotate the SHUTTER dial to change the setting, and then
press the SHUTTER dial.
• The setting area stops blinking and the setting is
entered.
To change multiple items, repeat the procedures in steps
5. and 6. above.
7.
Return to the TOP MENU.
Rotate the SHUTTER dial to align the cursor (K) with the
PAGE BACK item, and then press the SHUTTER dial.
To change settings on other menu screens, repeat the pro-
cedures in steps 4. to 7. above.
To save the set contents in FILE, select the FILE MANAGE
menu screen and perform the operations for saving to file.
X See "FILE MANAGE Menu Screen" on page 83.
8.
To return to the normal screen after completing the set-
tings, use either of the following methods.
Press the STATUS button
or
Return to the TOP MENU screen and align the cursor (K)
with the EXIT item, and then press the SHUTTER dial.
MEMO
• While the menu screen is being displayed, the USER1,
USER2 and USER3 buttons can also perform menu oper-
ations.
USER1 button: Raises the cursor (K)/Changes the set-
ting
USER2 button: Lowers the cursor (K)/Changes the set-
ting
USER3 button: Confirms the menu item/Confirms the set-
ting
• The menu screen is not displayed when switching
between Camera and VTR mode (VTR indicator flashes).