Setting And Adjustments Before Shooting; Camera Settings; Screen Size (4:3/Letter) Mode Selection - JVC gy-dv5100 Instructions Manual

6. SETTING AND ADJUSTMENTS BEFORE SHOOTING

6-1 Camera Settings

3.
2.
B C D
6-2 Screen Size (4:3/LETTER/SQUEEZE) Mode Selection
The screen size of recorded images can be selected with the ASPECT RATIO item on the CAMERA OPERATION menu screen.
☞ See page 75.
● To record using the standard screen, set ASPECT RATIO to 4:3.
● When ASPECT RATIO is set to LETTER, the image is recorded in a 16:9 aspect ratio with the upper and lower parts of the image
cut. In this case, the viewfinder screen or LCD will show the 16:9 aspect ratio image with the upper and lower parts of the image
cut.
● When the ASPECT RATIO is set to SQUEEZE, 16:9 image is output vertically squeezed to fit 4:3 screens.
MEMO:
● The safety zone of the standard screen and the 16:9 screen can be displayed in the viewfinder or LCD by setting the
SAFETY ZONE item on the LCD/VF (1/2) menu screen. ☞ See page 81.
● When ASPECT RATIO is set to LETTER or SQUEEZE, 16:9 aspect ratio distinction ID signal is output from the Y/C OUT
terminal.
● When the DATE REC item on the TIME/DATE screen is set to "BARS" or "BARS+CAM" while ASPECT RATIO item in
CAMERA OPERATION menu is set to LETTER, the screen size will be fixed at an aspect ratio of 4:3.
Downloaded From CamcorderManual.com JVC Manuals
EDITSEARCH
MONITOR
FILTER
1 3200K
2 5600K 1 8 / ND
.3 5600K
.4 5600K 1 64 / ND
STATUS
SHUTTER
LCD BRIGHT
MENU
AUDIO
LEVEL
FRONT
AUTO IRIS FULL AUTO BLACK LOLUX REAR
CH-1 CH-2
CH-1 CH-2
MODE
AUDIO INPUT
BACK L STRETCH
VTR AUDIO SELECT
NORMAL NORMAL CH-1 CH-2
SPOT L COMPRESS AUTO
CAM
MANUAL
POWER VTR
ON OFF
1.
POWER VTR
ON OFF
A
4.
VF
5.
OFF ZEBRA
SKIN AUTO
ON
AREA WHITE
ACCU
FOCUS
VTR
AUDIO
LEVEL CH-1
5
1.
POWER SUPPLY
1 First place a charged battery pack in the battery case on
the rear section of the unit. If battery pack is not used,
connect DC power to the DC INPUT connector on the
OPEN
rear section of the unit using the AC power adapter (AA-
P250) to supply DC 12 V current.
DISPLAY
PULL
OPEN 2 Set the POWER switch to ON.
2.
SWITCH positions
A. MODE switch: Camera mode (CAM indicator should be
on).
B. [GAIN] switch: Set to L. The L position is always 0 dB.
C. [OUTPUT] switch: Set to CAM-AUTO KNEE OFF.
CAM
D. [WHT. BAL] (Auto White Balance) switch: Set to A or B.
indicator
3.
Set the lens' iris mode switch to "A" (AUTO IRIS side)
4.
Choose the proper color temperature conversion filter.
FILTER
1 3200K
2 5600K+1/8ND
3 5600K
4 5600K+1/64ND
5.
Using the SHUTTER dial, set the shutter speed to OFF
(1/60).
Suitable Location
Indoors, dark outdoors
Outdoors under clear sky
Outdoors
Outdoors under extremely
bright conditions
47