Sensor; Actuator - Mitsubishi 2013 Outlander Service Manual

35C-8
CONSTRUCTION DIAGRAM

SENSOR

WHEEL SPEED SENSOR
Refer to GROUP 35B − Sensor P.35B-2.
G & YAW RATE SENSOR
ASC-ECU
The G & yaw rate sensor is integrated in the
ASC-ECU, and detects the yaw rate and longitudinal
and lateral acceleration of a vehicle.
STEERING WHEEL SENSOR
Steering wheel sensor
ASC OFF SWITCH OPERATION AND SYSTEM OPERATION
ASC OFF switch operation
Not operated
Operated (Press and hold for 3
seconds)
NOTE: The stability control is available when the
vehicle speed is 15 km/h or more.

ACTUATOR

HYDRAULIC UNIT
The hydraulic unit incorporates the ABS control and
ASC control. The cut valve, pressure relief valve,
suction valve, suction damper, G & yaw rate sensor
and pressure sensor have been added to the unit for
ACTIVE STABILITY CONTROL SYSTEM (ASC)
ACTIVE STABILITY CONTROL SYSTEM (ASC)
The steering wheel sensor is attached to the column
switch, and detects the rotational angle of the steer-
ing wheel.
M2355001100471
ASC OFF SWITCH
The ASC OFF switch is installed on the side air outlet
(driver's side). ASC functions can be disabled by
ACB06006AB pressing this switch for 3 seconds (The HSA and BA
function operates even when the ASC system is
turned OFF with the ASC OFF switch). Pressing this
switch again resumes the ON status. As a counter-
measure for the stuck of the ASC OFF switch, press-
ing the ASC OFF switch for 15 seconds resumes the
system to the ON status.
When the ignition switch is turned from "LOCK"
(OFF) to ON position, ASC functions are constantly
in the ON status.
ACB04993AB
TCL
Brake control Engine control
Enabled Enabled
Prohibited Prohibited
the ASC control.
NOTE: For the internal hydraulic circuit of the
hydraulic unit, refer to P.35C-16.
ASC OFF switch
Stability
control
Enabled
Prohibited
ACB04992AB
HSA BA
Enabled Enabled
Enabled Enabled
M2355001200467