Mitsubishi 2013 Outlander Service Manual page 350

54A-10
Parts name
Height sensor (rear)
Headlamp assembly (integrating
headlamp automatic levelling motor)
Combination meter
ABS-ECU or ASC-ECU
Engine-ECU
ETACS-ECU
Diagnosis connector
System block diagram
Engine-ECU
ABS-ECU or
ASC-ECU
Diagnosis connector
CHASSIS ELECTRICAL
LIGHTING
Functional description
Detects the elongation/contraction of the rear suspension and
transmits the signal to the ETACS-ECU.
Drives the headlamp reflector by receiving signals from the
ETACS-ECU.
Send an odometer indication value to the ETACS-ECU.
Transfers the vehicle travel distance information to the
ETACS-ECU.
Transfers engine speed signals and accelerator pedal position
signals to the ETACS-ECU.
• Transfers lighting switch position signals, all door switch
ON/OFF signals, tailgate latch switch ON/OFF signals,
hazard warning lamp switch ON/OFF signals, headlamp
(low-beam) ON/OFF status signals.
• Controls the headlamp automatic levelling motor integrated in
the headlamp assembly based on the signals form switches
and sensors to control the beam direction according to the
vehicle posture.
Outputs diagnosis codes.
Ignition switch (IG1)
(CAN-C
communication)
ETACS-ECU
(CAN-C-Mid
communication)
Combination meter
Headlamp assembly (LH)
(integrating headlamp
automatic levelling motor)
Headlamp assembly (RH)
(integrating headlamp
automatic levelling motor)
Height sensor (front)
Height sensor (rear)
ACB05989AB