Mitsubishi 2013 Outlander Service Manual page 227

• By using the lock/unlock switches, the driver can
lock/unlock all the doors (including tailgate),
fold/unfold the door mirrors.
•
NOTE: Using a customisation function, the oper-
ation of the door mirrors can be enabled or disa-
bled (Refer to P.42A-38).
DESCRIPTION OF STRUCTURE AND
OPERATION
TRANSMITTER
<Front view>
Unlock switch
<Rear view>
Function Transmitter operation
Standard function Press the lock switch once.
(lock/unlock)
Press the unlock switch once.
DOOR AND TAILGATE
•
Indicator lamp
Lock switch
AC302207
Three-diamond mark
AC309781
AC403982 AC
BODY
The transmitter is integrated into the master key.
• When either switch is pressed, the transmitter
emits a radio signal representing a specific ID
code.
• There are two switches on the transmitter; the
lock switch and the unlock switch.
• An indicator lamp, which illuminates when signals
are transmitted, is added on the key grip. This
indicator lamp informs you of the signal transmis-
sion status and warns you of flat battery.
• A brilliant silver Three-diamond mark is stamped
on the back side of the key grip to improve
appearance.
• A signal transmission circuit (printed circuit) and
a battery are housed in one case. The case is
housed in the key grip, thus improving resistance
to water ingress.
• A coin type battery, CR1616 is used in the trans-
mitter.
• The transmitter switch operation allows the sys-
tem to operate as follows:
System operation
All doors (including the tailgate) are
locked.
NOTE: If the retracting function of the
electric folding mirrors is added using a
customisation function, it can be retracted
in synchronisation with a lock operation.
All doors (including the tailgate) are
unlocked.
NOTE: If the opening function of the
electrical folding mirrors is added as an
adjustment function, it can be opened in
synchronisation with an unlock operation.
42A-13