Combination Meter; General Information - Mitsubishi 2013 Outlander Service Manual

54A-22

GENERAL INFORMATION

There are two types of the combination meter; stand-
ard meter and high contrast meter. A speedometer is
located at the right, a liquid crystal display at the cen-
tre lower part, a tachometer at the left, and a meter
information switch <Standard meter> or rheostat illu-
mination switch <High contrast meter> at the right
lower part. The combination meter has the following
features:
Standard meter
• A segment-type LCD is adopted. For details refer
to P.54A-24.
CONSTRUCTION DIAGRAM
1
23
Tachometer
30
29
22
Tachometer <diesel powered vehicles>
CHASSIS ELECTRICAL

COMBINATION METER

M2545500201078
4
3
2
21
28
18, 19
20
27
Multi-information display
COMBINATION METER
• An ECO drive assist indicator makes the driver
aware of economical driving to reduce fuel con-
sumption.
• Pressing an ECO mode switch illuminates an
ECO indicator in the meter.
High contrast meter
• A colour liquid crystal display has been adopted.
For details refer to P.54A-26.
• A navigation indicator has been adopted. <Vehi-
cles with MMCS>
• A meter information switch is located in the
instrument panel.
• Pressing an ECO mode switch illuminates an
ECO indicator in the multi-information display in
the meter.
5
6
24 25
7
26
17
Speedometer (mile and km)
8
9
10
Speedometer (km)
12
13
14
15
16
11
Meter information
switch
ACC00843AB