General Information - Mitsubishi 2013 Outlander Service Manual

35A-2
Brake systems with higher reliability and durability
have achieved distinguished braking performance.
FEATURES
IMPROVEMENT OF BRAKING PERFORM-
ANCE
• In addition to the 10-inch single brake booster,
the small and long stroke-type master cylinder
has been adopted to achieve the downsizing and
secure the assist force.
CONSTRUCTION DIAGRAM
Hydraulic unit
Master cylinder
SPECIFICATIONS
Item
Master cylinder Type
I.D. (Inner diameter) mm
Brake booster Type
Size inch
Boost ratio
Rear wheel hydraulic control method
BASIC BRAKE SYSTEM

GENERAL INFORMATION

GENERAL INFORMATION
Brake booster
Reserve tank
Front disc brake
• The installation of 16-inch ventilated disc brake
on the front axle and 16-inch solid disc brake on
the rear axle achieves the secure braking force
and direct braking feeling.
IMPROVEMENT IN SAFETY
• Diagonal split (X-type) brake lines is adopted.
• Audible wear indicators are used on the front and
rear brake pads to warn the driver of wear limit.
Brake pedal
Specification
Tandem type
20.6
Vacuum type, single
10
8.5
EBD (Electronic control braking force distribution)
M2350000101755
Rear disc brake
ACC00001AB