Mitsubishi 2013 Outlander Service Manual page 100

17-4
COMPONENTS AND FUNCTIONS
Component
ABS-ECU <Vehicles without ASC> or
ASC-ECU <Vehicles with ASC>
Accelerator pedal position sensor
Cruise control indicator lamp <standard
meter> or cruise control display screen
<high contrast meter>
Speed limiter display screen
Cruise control Cruise control ON/OFF
switches switch
Speed limiter ON/OFF
switch
RES + switch
SET − switch
CANCEL switch
CVT-ECU <Petrol engine>
A/T-ECU <Diesel engine>
Diagnosis connector
ENGINE AND EMISSION CONTROL
CRUISE CONTROL SYSTEM
Function
Outputs the cruise control cancel signal to the engine-ECU.
Informs the engine-ECU of the accelerator pedal depression.
When the cruise control ON/OFF switch is pressed, a lamp will
illuminate or a screen will be displayed to inform the driver that
the cruise control system is active.
When the speed limiter ON/OFF switch is pressed, a screen will
be displayed to inform the driver.
Power switch for cruise control system.
Turn ON/OFF the speed limiter.
• Vehicle speed is set with the RES + switch and SET − switch.
• Set vehicle speed of speed limiter is set with the RES +
switch and SET − switch.
• Cancels the constant speed driving.
• Cancel speed limiter in the activated mode.
• Controls the CVT based on the CVT control signal from the
engine-ECU.
• The selector lever "N" position signal from the inhibitor switch
is sent to the engine-ECU.
• Outputs the signal from the secondary pulley speed sensor to
the engine-ECU.
• Controls the automatic transmission shifting based on the
shift control signal from the engine-ECU.
• The selector lever "N" position signal from the inhibitor switch
is sent to the engine-ECU.
• Outputs the signal from the secondary pulley speed sensor to
the engine-ECU.
If the M.U.T.-III is connected, the diagnosis code and data list
from the engine-ECU can be read.