Multi Information Display <High Contrast Meter - Mitsubishi 2013 Outlander Service Manual

54A-26
SERVICE REMINDER
Service reminder indicator
When the inspection interval (alert start point in table
below) is due in accordance with the predetermined
schedule (see table below), the service reminder
indicator will be displayed when the ignition switch is
turned to the ON position. However, even if the warn-
SCHEDULE TABLE
Schedule
Normal
WARNING CRITERIA (WARNING START AND END POINTS)
Elapsed time
Warning start Warning end
point point
−30 days
+30 days
MULTI INFORMATION DISPLAY <HIGH
CONTRAST METER>
In the multi-information display, followings are dis-
played; "Drive mode indicator", "Caution mark",
"FCM OFF", "LDW indicator", "ECO mode indicator",
"Cruise control", "TRIP A", "TRIP B", "Meter illumina-
tion control", "Driving range" and "ECO drive assist",
"Average fuel consumption", "Average speed/Instant
fuel consumption", "AS&G status", "ECO score indi-
CHASSIS ELECTRICAL
COMBINATION METER
ACC01997AB
Warning type
Elapsed time (month)
Driving distance (miles)
Driving distance (km)
Driving distance (km)
Warning start
point
− 500 km
M2545500500548
ing condition is met, the indicator does not display
immediately. It illuminates next time when the ignition
switch is turned ON. The impending inspection inter-
val can be displayed by changing the LCD section by
the meter information switch. The service reminder
indicator will go off when it is reset by operating the
meter information switch according to the specified
*
procedure , or the warning criteria (end point) shown
in the table below is satisfied.
NOTE: .
•
*
: For details about the meter information switch
special operation, refer to the Workshop Manual.
Warning criteria
Every 12 elapsed months
Every 12,500 miles of driving distance
Every 20,000 km of driving distance
Driving distance (miles)
Warning end Warning start
point point
− 300 miles
+500 km
cator", "Service reminder
"Selector lever position", "Engine coolant tempera-
ture", "Fuel remaining", "AS&G status display
screen", "Odometer", "Outside temperature". Dis-
played contents can be switched by operating the
meter information switch.
NOTE: .
• *
: Is not displayed during driving.
Warning end
point
+300 miles
* *
", "Function setting ",