Messages Displayed After Pressing The Start Key - Canon FAX-L2000 Facsimile Manual

3

Messages Displayed After Pressing the Start Key

When the machine sends a document, messages appear on the LCD display, and report the
following information about the transmission:
Transaction Number
A transaction number is assigned to every document that is sent from your machine starting
with 0001 up to 4999. When the number 4999 is reached, numbering begins again from
0001.
3-16 Overview of Sending Methods
2
Specify the destination.
You can specify the destination using regular dialing, one-touch speed dialing,
coded speed dialing, access code dialing, group dialing, or directory dialing.
(See "Using Regular Dialing", on p. 3-8, "Using Speed Dialing", on p. 2-34, or
"Using Directory Dialing", on p. 2-42.)
NOTE
• When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
• You can also use
telephone number again.
• If you notice that you made a mistake while the machine is dialing the number, press
(Stop) to return to the Standby mode
3
Press (Start).
The machine starts scanning the first page into memory.
NOTE
• If you are using one-touch or coded speed dialing with the timeout feature 'ON', you do
not need to press
scanning the document automatically.
• The timeout feature can be turned 'OFF'. (See "TX (Send) Settings", on p. 11-13.)
TRANSMIT
SCANNING
(Clear) to clear the entire telephone number
C
start again.
(Start). The machine pauses for five seconds before it starts
0007
Transaction Number
P.001
enter the correct digit.
start entering the