Canon FAX-L2000 Facsimile Manual page 197

Setting
5. TIME SETUP
1. START TIME
EVERYDAY*
SELECT DAYS
2. END TIME
EVERYDAY*
SELECT DAYS
6. PRINT RX DOC.
OFF*
ON
# OF RX COPIES
An asterisk (*) indicates the default setting.
8
Press (Stop) to return to the Standby mode.
Description
Sets the time for the machine to enter and leave the
Transfer mode. If you do not set the timer, you can still
switch the Transfer mode ON/OFF manually.
Sets a specified time for the machine to automatically
start the transfer operation.
Sets the machine to start the transfer operation
everyday. You can set up to five start times for every day
of the week.
1.SUN to 7.SAT
Sets the machine to start the transfer operation only on
selected days of the week. You can set up to five start
times for any of the selected days.
Sets a specified time for the machine to end the transfer
operation, and return to normal operations.
Sets the machine to end the transfer operation everyday.
You can set up to five end times for every day of the
week.
1.SUN to 7.SAT
Sets the machine to end the transfer operation on the
selected days of the week. You can set up to five end
times for any day that you select.
If your machine is the transfer unit, this setting
determines if your machine prints a copy of every
document it transfers.
Received and transferred documents are not printed at
the transfer unit.
A copy of every document received and transferred is
printed at the transfer unit.
If you turn PRINT RX DOC. 'ON', use this setting to
specify the number of copies you want to print (01 to 99).
Use the numeric keys to enter the number, or press [ ]
or [ ] to increase or decrease the number
Default setting: '01COPIES*'
Transferring Documents
9
press [OK].
9-5