Canon FAX-L2000 Facsimile Manual page 174

OK
Subaddress
1 2 3
4 5 6
8
7 8 9
0
OK
Password
8-4 Polling Other Fax Machines to Receive a Document
NOTE
• You cannot use one-touch or coded speed dialing number that is set for any other type
of transmission but 'REGULAR TX.'
• When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
• You can also use
telephone number again.
• If you notice that you made a mistake while the machine is dialing the number, press
(Stop) to return to the Standby mode
• You can also select a sender's name with [TTI Selector]. (See "Selecting a Sender's
Name", on p. 3-6.)
5
If you want to receive a document from a fax machine that has
set an ITU-T subaddress, press [OK]
If you want to receive a document from a fax machine which does not have an
ITU-T subaddress/password set, proceed to step 9.
TEL=
10 CANON U.S.A.NY
NOTE
• You must press [Subaddress] within five seconds of pressing
longer than the timeout interval before pressing [Subaddress], the machine starts dialing
the number. The timeout interval can be turned 'OFF'. (See "TX (Send) Settings", on
p. 11-13.)
6
Enter the ITU-T subaddress using the numeric keys
[OK].
SUBADDRESS
1234567890
NOTE
• You must enter the correct subaddress, including
party's machine. Otherwise, your machine cannot start polling.
7
If an ITU-T password is required, press [Password].
Otherwise, proceed to step 9.
PASSWORD
(Clear) to clear the entire telephone number
C
start again.
123 4567 SUBADDRESS
TEL=
10 CANON U.S.A.NY
enter the correct digit.
start entering the
[Subaddress].
OK (OK). If you wait
press
123 4567
, #, and spaces, set on the other