4
Specify the destinations
You can specify up to 210 destinations using regular dialing, one-touch speed
dialing, coded speed dialing, access code dialing, group dialing, or directory
dialing. (See "Using Regular Dialing", on p. 3-8, "Using Speed Dialing", on
p. 2-34 or "Using Directory Dialing", on p. 2-42.)
TEL=
NOTE
• When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
• You can also use
telephone number again.
• If you notice that you made a mistake while the machine is dialing the number, press
(Stop) to return to the Standby mode
• You can press more than one speed dialing key to send the document to more than one
location after the timer goes off. If you want to enter the numbers with regular dialing for
a sequential broadcast, make sure you press
DELAYED TX
SENDER NAME
5
If you want to select a sender's name, press [TTI Selector]
TTI
Selector
or [ ] until the sender's name you want to use appears.
You can also use the numeric keys to select a sender's name.
OK
If you do not want to select a sender's name, proceed to step 6.
SENDER NAME
02 R.LOUIS
press
TEL=
10 CANON U.S.A.NY
(Clear) to clear the entire telephone number
C
start again.
SENDER NAME
Sending Documents at a Preset Time
(Start).
123 4567
enter the correct digit.
start entering the
(OK) after every number.
OK
CANON
3
[ ]
3-29