Canon FAX-L2000 Facsimile Manual page 146

6. PRINT RX DOC.
OFF*
ON
# OF RX COPIES
7. SELECT LOCATIONS
TEL =
8. TX REPORT
TRANSMIT*
6
NOT TRANSMIT
9. TX START TIME
10.RELAY B'CAST
ON*
OFF
An asterisk (*) indicates the default setting.
6-6 Setting Up and Using a Standard Relay Unit
Setting
If your machine is the relay unit, this setting determines if your machine
prints a copy of every document that it relays.
Your machine will not print a copy of every document it relays to other fax
machines.
Your machine prints a copy of every document it relays to other fax
machines.
If you turn PRINT RX DOC. 'ON', use this setting to specify the number of
copies you want to print (01 to 99).
Default setting: '01COPIES*'
This item enables you to select the machines to receive the document your
machine relays. The number of machines to receive the document must be
registered for one-touch or coded speed dialing. You cannot enter a
number with regular dialing.
Close the one-touch speed dialing panels, and press the speed dialing keys
where the numbers of the machines to receive the relay broadcast are
registered, then press [OK]. You can select up to 200 destinations.
This feature determines if your machine returns a relay transmission report
to the originator after your machine receives and relays a document.
After your machine relays a document, it sends a transmission report back
to the originator. In order for this feature to perform correctly, the
originator's telephone number must be registered on your machine for one-
touch or coded speed dialing, which must be set in <5.SELECT ORIG
UNIT>.
No relay transmission report is sent to the originator after a document has
been relayed.
You can set your machine to hold documents, and then relay them at a
preset time. If you do not set this item, all documents received for relay are
relayed immediately. If you want to use this feature, press [OK].
Use the numeric keys to enter the time in 24-hour notation. You can set up
to five times to relay documents within a 24-hour period everyday.
This feature switches relay broadcasting for this group 'ON' and 'OFF'
without altering any of the other settings.
Your machine receives and relays a document set for relay broadcasting.
Your machine will not receive or relay a document set for relay
broadcasting.
Description