Using Coded Speed Dialing - Canon FAX-L2000 Facsimile Manual

Using Coded Speed Dialing

Follow this procedure to start a transmission and send a document by pressing (Coded Dial)
followed by a three digit code.
IMPORTANT
• To use this feature, you must first register a telephone number for coded speed dialing. (See "Setting
Up Coded Speed Dialing", on p. 2-18.)
2
1 2 3
4 5 6
7 8 9
0
2-36 Using Speed Dialing
1
Place your documents on the machine.
For instructions explaining how to place your documents, see "Setting the
Document on the Machine", on p. 3-3.
DOCUMENT READY
NOTE
• You can adjust the resolution, contrast, and document type for scanning. (See "Adjusting
the Scan Settings", on p. 3-4.)
• You can also specify a sender's name with [TTI Selector]. (See "Selecting a Sender's
Name", on p. 3-6.)
2
Press (Coded Dial)
127) using the numeric keys.
After five seconds, the machine starts to send the document.
TEL=
012 CANON CANADA
If you are using Direct Sending, you will see a series of brief, alternating
messages that tell you the machine is dialing, calling, then transmitting the
document. The number being dialed, name of the other party, and transaction
number of the document are also displayed.
TRANSMIT
SCANNING
enter the desired three digit code (000-
123 4567
0005
P.001