Canon FAX-L2000 Facsimile Manual page 110

3
3-24 Redialing When the Line Is Busy
The AUTO REDIAL menu includes the following items:
Setting
1. REDIAL TIMES
2. REDIAL INTERVAL
3. TX ERROR RESEND
ON
ERROR & 1ST PAGE* The machine redials the number and resends the
ERROR PAGE
ALL PAGES
OFF*
An asterisk (*) indicates the default setting.
*1 Up to 2 times in Australia and 15 times in Malaysia.
*2 Minimum interval is 1 minute in Australia, New Zealand, Hong Kong, and Malaysia.
8
Press (Stop) to return to the Standby mode.
Description
Sets the number of times the machine attempts to dial a
number before it cancels the transaction automatically.
Even if the machine is set to redial several times, it will
redial only once if there is no dial tone or ring back tone
during the first attempt.
You can set the machine to redial between 01 to 10
*1
times.
(Default setting: '02TIMES'*)
Sets the length of time the machine waits between redialing
attempts.
You can set the time interval between 02 to 99 minutes.
(Default setting: '02MIN'.*)
Selects whether to perform automatic redialing when a
transmission error occurs.
The machine automatically redials the number after a
transmission error occurs, and enables you to customize
the redial operation.
document from the page where the error occurred, as well
as the first page of the document.
The machine redials the number and resends the failed
pages only.
The machine redials the number and resends all pages of
the document.
The machine does not automatically redial the number
after a transmission error occurs.
*2