Canon FAX-L2000 Facsimile Manual page 58

OK
2
OK
OK
OK
2-16 Setting Up One-Touch Speed Dialing
24
If you want to turn ECM (Error Correction Mode) 'ON' or 'OFF',
press [ ] or [ ] until <6.ECM> appears
OPTIONAL SETTING
6.ECM
NOTE
• ECM (Error Correction Mode) reduces system and line errors during sending or
receiving with another fax machine that supports ECM. If the other fax machine does not
support ECM, this setting is ignored. If the transmission speed appears to be extremely
slow, you may be able to speed up the transmission time by turning the ECM 'OFF'.
25
Press [ ] or [ ] to select 'ON' or 'OFF'
ECM
26
If you want to select a sender name, press [ ] or [ ] until
<7.SENDER NAME> appears
If you do not want to perform this setting, proceed to step 28.
OPTIONAL SETTING
7.SENDER NAME
27
Press [ ] or [ ] to select a sender name
SENDER NAME
02:L.SMITH
If you want to set up other one-touch speed dialing keys, repeat this procedure
from step 5.
This completes all the optional settings for a one-touch speed dialing key.
NOTE
• To perform this setting, you have to previously register sender's names. (See
"Registering Sender's Names", on p. 1-23.)
28
Press (Stop) to return to the Standby mode.
ECM
press [OK].
OPTIONAL SETTING
ON 7.SENDER NAME
press [OK].
SENDER NAME
00:CANON DIV.
TEL# REGISTRATION
11=
press [OK].
ON
press [OK].