Canon FAX-L2000 Facsimile Manual page 237

Setting Item
1. TEL LINE SETTINGS
1. USER TEL NO.
2. TEL LINE TYPE
*1
TOUCH TONE
ROTARY PULSE
3. TX START SPEED
4. RX START SPEED
2. UNIT NAME
3. SENDER NAME
1. SENDER NAME REG.
2. PERSONAL SETTINGS
1. SENDER FAX NUMBER
USER TEL NUMBER*
OTHER FAX NUMBERS
2. MAIL ACCOUNT
An asterisk (*) indicates the default setting.
1
* TOUCH TONE is the default in the U.K., Australia, New Zealand, and Singapore.
Set the user's telephone numbers on your machine, the type of
telephone line to which your machine is connected, transmission
start speed, and reception start speed.
Register your fax number. (See "Registering the Machine's
Telephone Number and Unit Name", on p. 1-17.)
Set the telephone line type. (See "Checking and Setting the
Telephone Line", on p. 1-20.)
The telephone line is set for touch tone dialing.
The telephone line is set for rotary pulse dialing. If you need to dial
into an information service that requires touch tone dialing, press
[Tone] on the operation panel. (See "Tone Dialing on a Pulse Line",
on p. 10-3.)
Set the transmission speed for all documents you send.
Available settings: 33600bps*, 14400bps, 9600bps, 7200bps,
4800bps, 2400bps
Set the transmission speed for all documents you receive.
Available settings: 33600bps*, 14400bps, 9600bps, 7200bps,
4800bps, 2400bps
Register your name or company's name. (See "Registering the
Machine's Telephone Number and Unit Name", on p. 1-17.)
Register up to 99 alternate sender's names. Before you send a
document, press [TTI Selector] and select a name to replace the
name you registered for the unit's name. (See "Registering Sender's
Names", on p. 1-23.)
Register the sender's names.
Set the sender's telephone number to be printed as part of the TX
Terminal ID on the document the other party receives when sending
a document with a registered sender's name.
Set the sender's fax number to be used with the sender's name you
are registering.
The user's telephone number is registered as the sender's fax
number.
You can specify the number you want to use as the sender's fax
number.
See the Sending Guide.
For the FAX-L2000, the installation of the optional Network Kit is
necessary to access these items.
Description
User Settings
11
11-5