Canon FAX-L2000 Facsimile Manual page 232

Feature
Redialing
Reduction of
Document Image
Report: Activity
Management Report
Report: Confidential
Receiving
Report: Error
Report: Receiving
Restricting Use:
Department ID
Speed
Stamp
10
Telephone Line
Unit Name, Unit
Telephone Number
10-14 How the Machine Operates with Default Settings
Menu Item
AUTO REDIAL
RX REDUCTION
ACTIVITY REPORT
CONFID. RX REPORT
TX REPORT
REPORT WITH TX
IMAGE
RX REPORT
DEPT.ID MANAGEMNT
LOCK PHONE
TX START SPEED
RX START SPEED
TX STAMP
TEL LINE TYPE
USER TEL NO.
UNIT NAME
Description of Default
If the other party's line is busy, the machine is set to
perform two redialing attempts within two minutes. You
can increase the number of redialing attempts and the
length of the time interval between attempts. (See "TX
(Send) Settings", on p. 11-13.)
All documents are automatically reduced to fit on one
sheet of paper. You can also set the reduction ratio to
one of the fixed ratios in the machine. Select one of the
fixed ratios to increase the amount of reduction, or you
can turn this feature 'OFF'. (See "Printer Settings", on
p. 11-18.)
An Activity Management Report prints after every 40
transactions. Transactions are listed in chronological
order. You can turn this feature 'OFF', or set the
machine to print an Activity Management Report at the
same time everyday. You can also change the format of
the report by listing sending and receiving transactions
separately. (See "Report Settings", on p. 11-10.)
A report prints every time you receive a document in a
confidential mailbox. You can turn this feature 'OFF'.
(See "Report Settings", on p. 11-10.)
If an error occurs while you are sending a document, an
Error TX report prints automatically. (See "Report
Settings", on p. 11-10.)
A report is not printed when you receive a fax. However,
you can set the machine to print a report every time you
receive a document or if an error occurs during
reception. (See "Report Settings", on p. 11-10.)
No password or department IDs are set on the machine
to restrict sending documents, printing, or using the
handset to make a telephone call. However, all of these
functions can be restricted. (See Chapter 5, "Summary
of Important Settings," in the Reference Guide.)
The starting speed for all transactions is set to
'33600bps'. Slower settings are available. (See "User
Settings", on p. 11-4.)
If you have the optional stamp feature installed on your
machine, you can turn the stamp feature 'ON' with this
setting. The default setting is 'OFF'. (See "System
Settings", on p. 11-28.)
Your machine is set to operate on a touch tone
telephone line. (See "User Settings", on p. 11-4.)
Your registered identification and fax number are printed
at the top and outside the image border of every
document you send. (See "User Settings", on p. 11-4.)