Black Box ME605A-FST Specifications

BLACK BOX
®
© Copyright 1998. All rights reserved.
Black Box Corporation.
Async Fiber Optic Mini Modem
Key Features
Supports asynchronous
transmission up to 19.2 Kbps.
Drives data up to 2 miles
(3 km) over multimode fiber.
Operates in full- or half-
duplex mode.
Configurable for
continuous or controlled
carrier.
Includes a handy
DCE/DTE switch.
Needs no external power.
1
The World's Source for Connectivity
hen you need to connect
W
full- or half-duplex async
computers and terminals,
choose the Async Fiber Optic
Mini Modem. A pair of these
modems can drive data over
multimode fiberoptic cable up
to 2 miles (more than 3 km) at
data rates up to 19.2 Kbps.
Special circuitry allows the
modem to operate without
external power, by deriving
ultra-low power from the DTE
data and control signals on the
interface.
Two models are available:
• Async Fiber Optic Mini
Modem with (2) fiberoptic
ST connectors and (1) DB25
female connector (part
number ME605A-FST)
• Async Fiber Optic Mini
Modem with (2) fiberoptic
ST connectors and (1) DB25
male connector (part
number ME605A-MST)
And you can configure the
modem for continuous or
controlled carrier to suit your
application.
Typical Application
Connect an async computer to an async terminal via a pair of
Async Fiber Optic Mini Modems.
SM
Complete async
modem functionality
in an ultra-mini
package that requires
no external power.
Setting the modem for DCE
or DTE operation is a breeze,
too. Simply move the handy
DCE/DTE switch to the
desired position.
For proper operation,
remember that modems must
be used in pairs.
®