OfficeServ 7200
INSTALLATION
TECHNICAL MANUAL
PART 7 MAY 2010
Once a site is defined and highlighted in the top section of the <Link Control> window
(see
Figure
7.40), simply click on the
icon to connect to the MP10/MP10a/MCP/MP20/MP40.
The
icon is used to upload OfficeServ application files to the storage media.
In order to change a particular parameter on a defined site, highlight the site (like in the
picture above), modify the parameters on the bottom part of the window, and then click the
[Update] button.
If the [Link Type] for a particular site is set to Modem, enter the COM port number, the baud
rate,
and
the
telephone
number
for
the
modem
connected
to
the
MP10/MP10a/MCP/MP20/MP40 and then click the [Update] button to save the change.
Figure 7.40 Site List: Link Type Modem
7.44