OfficeServ 7200
TECHNICAL MANUAL
PART 3. INSTALLING AND REPLACING BOARDS
This section describes how to install and replace various boards of the OfficeServ 7200 system.
3.1 CABINET CONFIGURATION
The main and expansion cabinets of the OfficeServ 7200 system have six slots each.
The front panel
of an expansion
cabinet
The front
panel of a
main cabinet
The following boards may be installed in the cabinet slots according to the configuration of the
OfficeServ 7200.
Cabinet
Expansion Cabinet
Main Cabinet
Slot 0
Slot 1
Slot 3
Slot 4
Slot 0
Slot 1
Slot 3
Slot 4
Figure 3.1 Front Panel Configuration
Table 3.1 Applicable Boards per Slot
Slot
Slot 0
For LCP ONLY
All boards EXCEPT MCP/MP20, LCP, TEPRI/TEPRIa and
Slot 1
PLIM/PLIM2
Slot 2
All boards EXCEPT MCP/MP20, LCP, TEPRI/TEPRIa and WIM
All boards EXCEPT MCP/MP20, LCP and WIM
Slot 3
Slot 4, 5
All boards EXCEPT MCP/MP20, LCP, TEPRI/TEPRIa and WIM
Slot 0
For MCP/MP20 ONLY
All boards EXCEPT MCP/MP20, LCP, TEPRI/TEPRIa and
Slot 1
PLIM/PLIM2
All boards EXCEPT MCP/MP20, LCP, TEPRI/TEPRIa and WIM
Slot 2
Slot 3, 4, 5
All boards EXCEPT MCP/MP20, LCP and WIM
3.1
Home Page
INSTALLATION
PART 3 MAY 2010
Slot 2
Slot 5
Slot 2
Slot 5
Applicable Boards
Table of Contents