Samsung OfficeServ 7200 Technical Manual page 48

Table of Contents
Home Page
OfficeServ 7200 INSTALLATION
TECHNICAL MANUAL PART 3 MAY 2010
• See Section 7.1.2 for port Pinout/Wiring.
• Do not connect devices with a total REN greater than 5.0 to this card.
3.3.11 8SLI/8SLI2
This board provides 8 ports for connecting analog stations. It can go into slots 1 through 5 of
either the main or the expansion cabinet. Add as many as needed. This card automatically
detects DTMF or dial pulse signals from SLT. This card does not have any DTMF receivers; it uses
system resources. If there is a high concentration of SLI boards, an MFM daughter board must
be added to the MCP/MP20 to relieve congestion.
FRONT VIEW OF 8SLI/8SLI2
The front view of the 8SLI and 8SLI2 boards are shown in the pictures below.
Figure 3.31 Front View of the 8SLI
Figure 3.32 Front View of the 8SLI2
3.30