Samsung OfficeServ 7200 Technical Manual page 113

OfficeServ 7200
TECHNICAL MANUAL
NOTE: THE DIRECTORY CARD SLIDE TRAY IS NOT
WALL-MOUNTING KEYSETS
iDCS keysets come equipped with a reversible base wedge. To wall-mount a keyset, remove
the wedge from the keyset and remove the directory tray from the wedge. Mount the wedge
to the wall using one of the methods below
Use screw holes 1 and 2 to attach the base wedge to a standard electrical outlet box.
Use screw holes 1 and 3 to attach to a standard telephone wall-mount plate with locking pins.
This method can cause the keyset to wobble as the keyset feet do not fit securely to the
mounting surface.
Use screw holes 4 and 5 if you are mounting on dry wall with a hole in the middle for cable
access.
1
4
2
3
HOLES FOR MOUNTING SCREWS
Figure 7.19 Wall-Mounting a Keyset
(see Figure 7.19).
OR
OR
7.15
Table of Contents
Home Page
INSTALLATION
PART 7 MAY 2010
5