Table of Contents
Advertisement
OTMC 100 Series User Manual
7.3.6
SNMP Configuration Page
Configuration via the Simple Network Management Protocol (SNMP) is only possible for the power
profile settings (as defined by IEEE C37.238-2011 MIB) of the OTMC 100p. No other settings can be
configured via SNMP.
Use this page to configure the access via the Simple Network Management Protocol (SNMP). Click
the Save All button to save and apply your SNMP configuration specified in the individual tabs to the
OTMC 100.
A MIB file is required for proper representation of the OTMC 100 settings in SNMP clients.
Refer to the Device Control page (see page 83) of the Tools section to download the MIB
file from the OTMC 100.
7.3.6.1 Access tab
80
Advertisement
Table of Contents
