7.3.6 SNMP configuration page
Configuration via the Simple Network Management Protocol (SNMP) is only possible for the Power
profile settings (as defined by IEEE C37.238-2011 MIB) of OTMC 100p. No other settings can be
configured via SNMP.
Use this page to configure the access via the Simple Network Management Protocol (SNMP). Click
the Save All button to save and apply your SNMP configuration specified in the individual tabs to
OTMC 100.
A MIB file is required for proper representation of OTMC 100 settings in SNMP clients. Refer
to the
Device Control page
from OTMC 100.
7.3.6.1
Access pane
Read community
Read/write community
OMICRON
(see page 78) of the Tools section to download the MIB file
Use this field to specify the community name for read access. SNMP clients
of this community can obtain read access to OTMC 100.
Use this field to specify the community name for read and write access.
SNMP clients of this community can obtain read and write access to
OTMC 100.
The OTMC 100 web interface
75