Table of Contents
Advertisement
Click Manual in the top right corner to open this manual in PDF format.
Click Support in the top right corner to open the contact information page providing OMICRON
contact addresses and information how to contact the technical support of OMICRON in case of
problems.
Click License Information in the bottom right corner to view copyright and license information
regarding open source products used in the OTMC 100 software.
The Web Interface is divided into four main sections. Click an icon in the navigation bar on the left to
access the corresponding pages.
Overview (see page 36)
This page provides an overview of the current settings and states of the
OTMC 100.
Status (see page 39)
The Status pages provide detailed information about the GPS status (e.g.
number of satellites, time and position) and the PTP, NTP and network status.
An additional Log Viewer page shows all events logged in the internal log
file.
Configuration (see page 57)
Use the Configuration pages to view and configure the network, security,
PTP and NTP settings. You can furthermore configure the event logging and
the e-mail notification function of the OTMC 100, and the SNMP settings.
Tools (see page 82)
Use these pages to perform a software upgrade for the OTMC 100 or to
perform a reboot or a factory reset for the device. You can furthermore
download a system snapshot containing important information for the
technical support in case of problems.
The OTMC 100 Web Interface
35
Advertisement
Table of Contents
