Table of Contents
Advertisement
IPv4 Broadcast
Select the Enabled check box to enable the sending of IPv4 broadcast
messages containing NTP time information.
If enabled, enter the broadcast IP address in dot-decimal notation (e.g.:
192.168.0.255).
Minpoll specifies the interval for sending the broadcast messages as a power of
2 (i.e., in 2
Possible values for Minpoll: 4 to 17 resulting in a broadcast interval between 16
and 131072 seconds.
IPv4 Multicast
Select the Enabled check box to enable the sending of IPv4 multicast messages
containing NTP time information.
If enabled, enter the IPv4 multicast address in dot-decimal notation (e.g.:
224.0.1.1).
Minpoll specifies the interval for sending the multicast messages as a power of 2
(i.e., in 2
Possible values for Minpoll: 4 to 17 resulting in a broadcast interval between 16
and 131072 seconds.
IPv6 Multicast
Select the Enabled check box to enable the sending of IPv6 multicast messages
containing NTP time information.
If enabled, enter the IPv6 multicast address in hexadecimal notation (e.g.:
ff05::101).
Minpoll specifies the interval for sending the multicast messages as a power of 2
(i.e., in 2
Possible values for Minpoll: 4 to 17 resulting in a broadcast interval between 16
and 131072 seconds.
See the "ntp.conf man page" for a more detailed description of the NTP parameters (see
Linux command "man ntp.conf").
x
seconds).
x
seconds).
x
seconds).
The OTMC 100 Web Interface
75
Advertisement
Table of Contents
