Omicron Lab OTMC 100 User Manual page 41

Antenna status (cont.)
Satellites visible
Satellites usable
Satellites used
TAI time
UTC offset from TAI
Position
Unknown: The antenna status cannot be determined. Please check the
log file and try to reboot the device (see "Performing a reboot of the
OTMC 100" on page 28). If this does not help, contact the OMICRON
support.
See chapter "Contact Information / Technical Support" on page 94 for
OMICRON addresses and information how to contact the technical
support of OMICRON.
Displays the number of satellites the OTMC 100 can "see" in the sky.
Displays the number of satellites from which the OTMC 100 can receive
signals with sufficient quality.
The OTMC 100 requires at least 4 "useable" satellites.
Displays the number of satellites actually used by the OTMC 100 for time
synchronization and position determination.
Displays the date and time according to the International Atomic Time
(TAI). TAI is the basis for UTC with the difference that UTC is occasionally
adjusted by adding a leap second (in order to keep the difference between
UTC and UT1 lower than 0.9 seconds).
Displays the difference of UTC with regard to TAI.
Displays the position coordinates (latitude and longitude) in degrees,
minutes and seconds, and the height in meters and feet.
The OTMC 100 Web Interface
41