Table of Contents
Advertisement
Log sync interval
Log min pdelay request
interval
Log min delay request
interval
Log announce interval
Use this field to specify the logarithm to the base 2 of the mean
synchronization interval (interval between successive Sync messages
x
in 2
seconds) for multicast messages. See "logSyncInterval" in
IEEE 1588-2008.
For example, a value of 2 will result in a synchronization interval of 4
2
seconds (= 2
).
Note:
Log sync interval
Sync interval = 2
8.2.5.4.3.
Use this field to specify the logarithm to the base 2 of the minimum
permitted mean time interval between successive Pdelay_Req
messages (interval in 2
IEEE 1588-2008. Only available for PTP profile "Default P2P" and
"Power Systems"!
For example, a value of 0 will result in an interval of 1 second (= 2
Note:
Minimum pdelay request interval = 2
IEEE 1588-2008, clause 8.2.5.4.5.
The logarithm to the base 2 of the minimum permitted mean time
interval between successive Delay_Req messages (interval in 2
seconds). This value is determined and advertised by a master clock
based on the ability of the master. Only available for PTP profile
"Default E2E"!
For example, a value of 1 will result in an interval of 2 seconds (= 2
Range:
Log sync interval <= Log minimum delay request interval <=
Log sync interval + 5
Note:
Minimum delay request interval = 2
IEEE 1588-2008, clause 8.2.5.3.2.
See IEEE 1588-2008 for more detailed information.
Use this field to specify the mean time interval in 2
successive Announce messages. See "logAnnounceInterval" in
IEEE 1588-2008.
For example, a value of 1 will result in an interval of 2 seconds (= 2
seconds, see IEEE 1588-2008, clause
x
seconds). See "logMinPdelayReqInterval" in
Log min pdelay request interval
Log min delay request interval
The OTMC 100 Web Interface
0
).
seconds, see
x
1
seconds, see
x
seconds between
1
).
).
71
Advertisement
Table of Contents
