Table of Contents
Advertisement
OTMC 100 Series User Manual
7.3.2
Security Configuration Page
Use the Security page to configure the security of the OTMC 100. It is possible to activate password
protection for accessing the OTMC 100, generate and define authentication certificates for accessing
the OTMC 100 via the secure HTTPS protocol and to disable remote configuration of the OTMC 100,
for example via the OMICRON Device Browser or the PTP and SNMP management interfaces.
Select the corresponding tab to specify the security options to be used by the OTMC 100.
7.3.2.1 Access Control tab
Use this tab to define password protection for accessing the OTMC 100. Click the Change button to
save and apply your access control settings to the OTMC 100.
Change password
Confirm password
Web Interface authentication
enabled
62
Enter your password for accessing the OTMC 100. The OTMC 100
uses the same password for all services and processes running on
the OTMC 100 (e.g., detection by OMICRON OMFIND service, FTP
access, etc.)
The password is case sensitive and must have at least 5 characters
(letters, figures or special characters).
Repeat your password for confirmation.
Select the check box to activate password protection using the
currently defined password. If enabled, a login dialog appears when
accessing the OTMC 100 Web Interface.
The OTMC 100 is delivered with the default password timeserver.
Once the password has been changed, the new password is used
when selecting this check box.
Advertisement
Table of Contents
