Table of Contents
Advertisement
OTMC 100 Series User Manual
7.2.4.2 IPv4 tab
The IPv4 tab displays the IPv4 specific configuration settings of the OTMC 100. The IPv4
configuration is set in the Network configuration (see page 58) .
Configuration
IP address
Network mask
Gateway
Name server 1
Name server 2
7.2.4.3 IPv6 tab
The IPv6 tab displays the IPv6 specific configuration settings of the OTMC 100. The IPv6
configuration is set in the Network configuration (see page 58) .
Configuration
IP address
Network mask
Gateway
Name server 1
Name server 2
Link local address
Link local mask
54
Displays the configuration method selected for IPv4.
Disabled: IPv4 is switched off.
Static: The IP address was assigned manually by the user.
DHCP: The IP address was assigned automtically by a DHCP server.
Displays the currently assigned IPv4 address of the OTMC 100 (e.g.:
192.168.1.100).
Displays the network mask in dot-decimal notation (e.g.: 255.255.255.0).
If set, this parameter displays the gateway address in dot-decimal notation
(e.g.: 192.168.1.1).
If set, these parameters display the address of the first and second name
server selected in dot-decimal notation (e.g.: 192.168.1.50).
Displays the configuration method selected for IPv6.
Disabled: IPv6 is switched off.
Static: The IP address was assigned manually by the user.
Autoconf: The IP address was assigned automatically using the Stateless
Address Autoconfiguration (SLAAC).
Displays the currently assigned IPv6 address of the OTMC 100.
Displays the network mask in dot-decimal notation.
If set, this parameter displays the gateway address in hexadecimal notation.
If set, these parameters display the address of the first and second name
server in hexadecimal notation.
Displays the link local address and the respective mask automatically assigned
by the Stateless Address Autoconfiguration (SLAAC) if the Autoconf
configuration is selected in the IPv6 Network configuration (see page 58) .
Advertisement
Table of Contents
