Table of Contents
Advertisement
LED lights green
The pushbutton can be accessed after unscrewing the water-tight membrane vent.
Membrane vent
detached
Pushbutton
The pushbutton can be used to:
•
Initiate a device reboot.
•
Initiate a factory reset to reset the device configuration to the factory defaults (for example, if you
forgot your password).
•
Enter the recovery mode in order to upload software to the device (for example, after a software
update process failed).
Please refer to "Operating Procedures Performed Directly on the Device" on page 31 for more
detailed descriptions.
The OTMC 100 is ready for operation.
The green LED does not provide information about the
number of satellites received or the actual time accuracy
provided by the OTMC 100. Such information are
displayed in the Status pages (see page 39) of the Web
Interface.
LED
Device Overview
Pushbutton
13
Advertisement
Table of Contents
