Security Configuration Page - Omicron Lab OTMC 100 Series User Manual

OTMC 100 Series User Manual

7.3.2 Security configuration page

Use the Security page to configure the security of OTMC 100. It is possible to activate password
protection for accessing OTMC 100, generate and define authentication certificates for accessing
OTMC 100 via the secure HTTPS protocol, and to disable remote configuration of OTMC 100, for
example via OMICRON Device Link or the PTP and SNMP management interfaces.
Select the corresponding pane to specify the security options to be used by OTMC 100.
7.3.2.1 Access Control pane
Use this pane to define password protection for accessing OTMC 100.
Change password
Confirm password
Access
58
Enter your password for accessing OTMC 100. OTMC 100 uses the
same password for all services and processes running on OTMC 100
(e.g., detection by OMICRON OMFIND service, FTP access, etc.)
The password is case sensitive and must have at least 6 characters
(letters, figures or special characters).
Repeat your password for confirmation.
Select Anonymous if you do not want to use password protection.
Select Password if you want to protect OTMC 100 against
unauthorized access by specifying a password. If password
protection is enabled, a login dialog appears when accessing the
OTMC 100 web interface.
Select Read-Only to allow unrestricted access to the Overview and
the Status section of the OTMC 100 web interface, and to protect the
Configuration and the Tools section against unauthorized access
by specifying a password. If read-only access is enabled, a login
dialog appears when accessing the Configuration section or the
Tools section of the OTMC 100 web interface.
If you set the Access field to Password without defining a
password, the default password timeserver will be used.
OMICRON