Table of Contents
Advertisement
1 0 C E R A M I C W A L L S I N S T A L L A T I O N
Fit the rear ceramic wall support bracket
1.
to the rear of the hotbox using two screws.
The "L" shaped section should be on top
with the two side tags underneath. See
figure 25.
Fit the ceramic rear wall inside the "L"
2.
bracket on the back face of the burner
compartment. Push the ceramic wall flat
against the back face of the burner
compartment. See figure 25.
Fit the ceramic side walls against the side
3.
faces of the burner
compartment. The
bottom edges of the
walls should rest in
the ledges at the sides
of the firebox. Slide
them in from the front
and ensure that they
touch the rear wall. Be
careful not to damage
the edges of the side
walls. See figure 26.
INSTALLER'S GUIDE
Figure 26. Side Wall Installation.
Page 27
Figure 25. Ceramic Rear Wall
Installation
Hide quick links:
Advertisement
Table of Contents
