Sealing Floor Front - All Installations - Valor Dream 2 Installer's Manual

Inset live fuel effect gas fire

Hide thumbs Also See for Dream 2:

Owner's manual (18 pages)

Table Of Contents

Table of Contents

Inspect the installation of the convection

12.

box against the fireplace surround. If the

convection box is aligned squarely and the

sealing is satisfactory, fully tighten the cable

retainers.

If the convection box is not correctly

13.

aligned, release the tension on the cables by

slackening the screws and turning the

hexagonal adjusters fully anticlockwise. The

convection box should then automatically

realign itself. Pull each cable taut again and

push the cable retainers back against the "V"

brackets. Again, tighten the screws in the

retainers and apply tension to the cables by

turning the hexagonal

adjusters clockwise as far as possible.

Underneath the 'V' shaped brackets is a hole. Feed the free length of the cables into

14.

these holes so that they are available to allow easy removal and refitting of the appliance

during subsequent service calls. Do not cut off the free lengths of cable

8.3