Table of Contents
Advertisement
INSTALLER'S GUIDE
8 H O T B O X I N S T A L L A T I O N
8.1 Method 1 - Front Fixing to Fireplace Surround
1. Make sure that the fireplace front surround area is sound enough to take the rawlplugs
and woodscrews. If necessary, make sound with a suitable cement.
2. Place the hotbox centrally in the fireplace in the position in which it is to be
permanently installed. If a concealed connection is being used, insert the hotbox into the
fireplace feeding the supply pipe through the pierced hole in the rear seal.
3. Mark the fireplace front surround through the four fixing holes in the side flanges of the
hotbox. See figure 16.
4. Remove the hotbox. Drill four holes in the fireplace front surround at the marked
positions using a no.12 masonry drill.
5. Insert a rawlplug into each hole.
6. Place the hotbox back in position in the
fireplace.
7. Fit a woodscrew through each hole in the
hotbox flanges and tighten to seal the box to
the fireplace surround.
Figure 16. Front Fixing
Page 21
Hide quick links:
Advertisement
Table of Contents
