Ceramic Coals & Walls Installation - Valor 417 Installation And Servicing Manual

9.1
With its feather edge at the top, place the ceramic
rear wall into the channel at the back of the fire box..
Push the wall flat against the rear of the fire box. (See
figure 17).
Fig. 17 Ceramic rear wall installation
9.2
Place the two halves of the front base coal in the
burner compartment so that they rest on the ledges
at the sides and front. Pull the coals forward so that
they are immediately behind the front rim of the
burner compartment (See fig. 18)
Fig. 18 Front coal installation
9. CERAMIC COALS & WALLS INSTALLATION
.
9.3
Place the rear base coal in the burner compartment
behind the front coal. Its rear face should touch the rear
ceramic wall (See figure 19).
Fig. 19 Rear base coal installation
9.4
The ceramic side walls are marked at the rear bottom
corners "L" (Left side) & "R" (Right side). Place the
side walls against the sides of the fire box and in the
recesses at the sides of the base coals. The markings
"L" & "R" should be at the at the back bottom
corners and facing to the centre of the back of the
firebox (See figure 20).
Fig. 20 Ceramic side walls installation
11