Wine Guardian Through-the-Wall Installation, Operation And Maintenance Manual page 36

Alarm Codes
High temperature
alarm
Low temperature alarm
High humidity alarm
Low humidity alarm
Open Fault
36
Press the "Up" or "Down" arrow once to change
screen from alarm to normal Temperature and
Humidity indication. "Hi Temp" will remain on
screen until temperature falls below the High
Temperature Alarm setpoint (Setting 3).
Press the "Up" or "Down" arrow once to change
screen from alarm to normal Temperature and
Humidity indication. "Lo Temp" will remain on
screen until temperature rises above the Low
Temperature Alarm set point (Setting 2).
Press the "Up" or "Down" arrow once to change
screen from alarm to normal Temperature and
Humidity indication. "Hi Hum" will remain on screen
until humidity falls below the High Humidity Alarm
setpoint (Setting 5).
Press the "Up" or "Down" arrow once to change
screen from alarm to normal Temperature and
Humidity indication. "Lo Hum" will remain on screen
until humidity rises above the Low Humidity Alarm
set point (Setting 4).
THIS ALARM FORCES THE SYSTEM TO
SHUT DOWN
Press the "Up" or "Down" arrow once to change
screen from alarm to normal Temperature and
Humidity indication.
"Alarm" will remain on screen until the High Pressure
reset switch has been reset. See the trouble shooting
guide page 47 for "Instructions to Reset High Pressure
Switch"