Section 2. Installation; Usb Connection; Figure 2-1. Reader Cable And Connector; Table 2-1. 4-Pin Connector - Elo TouchSystems ET1229L Series User Manual

This section describes the cable connection, the Windows Plug and Play Setup, and the physical
mounting of the unit.

USB CONNECTION

Connect the USB cable to a USB port on the host. The Reader, LED Indicator, and pin numbers
for the 4-pin connector are shown in Figure 2-1.
Pin numbers and signal descriptions for the cable shown in the illustration are listed in
Table 1-1.

SECTION 2. INSTALLATION

Figure 2-1. Reader Cable and Connector

Table 2-1. 4-Pin Connector

Pin Number Signal
1 V
CC
2 - Data
3 +Data
4 Ground
LED Indicator
Cable Color
Red
White
Green
Black
1 4
5