USB HID Keyboard Emulation Swipe Reader
PRE_TK_CHAR PROPERTY
Property ID:
Property Type:
Length:
Get Property:
Set Property:
Default Value:
Description:
character is sent. If the value is in the range 1 – 127 then the equivalent ASCII character will be
sent.
This property is stored in non-volatile EEPROM memory so it will not change when the unit is
power cycled. When this property is changed, the unit must be power cycled to have these
changes take effect. If a value other than the default value is desired, it can be set by the factory
upon request.
POST_TK_CHAR PROPERTY
Property ID:
Property Type:
Length:
Get Property:
Set Property:
Default Value:
Description:
character is sent. If the value is in the range 1 – 127 then the equivalent ASCII character be sent.
This property is stored in non-volatile EEPROM memory so it will not change when the unit is
power cycled. When this property is changed, the unit must be power cycled to have these
changes take effect. If a value other than the default value is desired, it can be set by the factory
upon request.
24
13 (0D hex)
Byte
1 byte
Yes
Yes
0
This character is sent prior to the data for each track. If the value is 0 no
14 (0E hex)
Byte
1 byte
Yes
Yes
0
This character is sent after the data for each track. If the value is 0 no