Advertisement
Unpacking the Touchmonitor
Open the carton and verify that the following items are present:
Touchmonitor with protective sheet for its face
Elo TouchTools CD & User Manuals CD
Japanese language regulatory information pamphlet
Quick Install Guide
VGA cable
USB cable
AC-DC power adaptor
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the VGA video cables between the monitor's VGA input connectors and your VGA
video source, respectively. Tighten the video cable's screws for best performance.
2. Connect the USB touch cable between the monitor's USB connector and your PC's USB
port.
3. Connect the power adaptor's input connector to the AC power source. Connect the power
adaptor's DC output connector to the monitor's input power jack.
4. The touchmonitor ships in an OFF state. Press the power button to turn it on.
Installing the Touch Technology Software Drivers
Some software installation is required for your touchmonitor to work with your computer.
The drivers for the Windows 7, XP, Vista, WePOS, and 32-bit Server 2003 and 2008 operating
systems are provided with your touchmonitor on a CD.
Chapter 2 –Installation
User Manual – 1509L
SW601532 Rev A
-
Page 5 of 18
Advertisement
