Installing The Usb Touch Driver; Installing The Usb Touch Driver For Windows Xp, Windows 2000, Me And 98 - Elo TouchSystems ET1229L Series User Manual

Installing the USB Touch Driver

Installing the USB Touch Driver for Windows XP,
Windows 2000, Me and 98
Insert the Elo CD-ROM in your computer's CD-ROM drive.
1
If Windows XP, Windows 2000,Windows 98, or Windows Me starts the Add
New Hardware Wizard:
Choose Next. Select "Search for the best driver for your device
2
(Recommended)" and choose Next.
When a list of search locations is displayed, place a checkmark on "Specify a
3
location" and use Browse to select the \EloUSB directory on the Elo
CD-ROM.
Choose Next. Once the Elo TouchSystems USB touchscreen driver has been
4
detected, choose Next again.
You will see several files being copied. Insert your Windows 98 CD if
5
prompted. Choose Finish.
If Windows XP, Windows 2000,Windows 98, or Windows Me does not start the
Add New Hardware Wizard:
For Windows XP and Windows 2000 you must have administrator access rights to install
N :
OTE
the driver.
Insert the Elo CD-ROM in your computer's CD-ROM drive.
1
If the AutoStart feature for your CD-ROM drive is active, the system
automatically detects the CD and starts the setup program.
Follow the directions on the screen to complete the driver setup for your
2
version of Windows.
If the AutoStart feature is not active:
Click Start > Run.
1
Click the Browse button to locate the EloCd.exe program on the CD-ROM.
2
Click Open, then OK to run EloCd.exe.
3
Follow the directions on the screen to complete the driver setup for your
4
version of Windows.
2-30
E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e