Elo TouchSystems ET1229L Series User Manual page 144

12.1" lcd touchmonior with optional magnetic stripe reader, finger print reader and rear facing customer display
Hide thumbs Also See for ET1229L Series:
Table of Contents

Advertisement

rawsend
Function
Send arbitrary data to the device.
Syntax
/rawsend x
x is an arbitrary string which is transmitted directly to the device. The string x is passed
as-is to the device, except for '\' which is used as an 'escape' character:
Errors
none
Remarks
This command as with the other raw commands supports any features that have not been
implemented in the standard set of commands. Note: the driver inserts appropriate framing
characters, e.g., <stx> and <etx>.
Example
To change the default message 00 to show "Welcome to Our Bank" on two lines of the
IntelliPIN:
Command
Response
rawxact
Function
Execute a send/receive transaction with the device in raw mode.
Syntax
/rawxact x
x is an arbitrary string which is transmitted directly to the device. The string x is passed
as-is to the device, except for '\' which is used as an 'escape' character:
Errors
/rawxact
If a command is already pending.
/rawxact
If the command was canceled by the user (e.g., with CLEAR key)
Remarks
This command is a combination of /rawsend and /rawrecv. It sends the supplied data to the
device, overrides the default processing of the next message that comes from the device and
returns it to the application as a /rawxact response. After the response is returned (or
canceled), the driver switches to normal operation. The syntax for this command is identical
to the syntax of the /rawsend command; the syntax of the response is identical to the
/rawrecv response.
Example
To load a master key of 23AB4589EF6701CD into the IntelliPIN:
Command
Response
\r is converted to <CR>
\n is converted to <LF>
\\ is converted to \
\xhh is converted to a character with ASCII value hh (always two hex digits),
e.g., \x20 is converted to a space.
/rawsend 5100Welcome to\x1COur Bank<LF>
none
\r is converted to <CR>
\n is converted to <LF>
\\ is converted to \
\xhh is converted to a character with ASCII value hh (always two hex digits),
e.g., \x20 is converted to a space.
45<LF>
82<LF>
/rawxact 9423AB4589EF6701CD<LF>
/rawxact
Section 3. Commands
00
940<LF>
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Entuitive 1229l

Table of Contents