Magnetic Stripe Reader; Testing The Serial Version; Testing The Usb Msr Keyboard Emulation; Testing The Usb-Hid Class Msr - Elo TouchSystems ET1229L Series User Manual

Magnetic Stripe Reader

No drivers are needed.

Testing the Serial Version:

Insure the MSR serial is connected. (Make a note of the serial port, COM1,
1
COM2, etc. it is connected to.)
Launch HyperTerminal
2
Go to file>new connection and type "MSR" then select OK.
3
In the Connect to Menu select Com port used in step one, then select OK.
4
In the Connection Property box set the following values:
5
Bits per second to 9600
•
Data Bits to 8
•
Parity to None
•
Stop bits to 1
•
Flow control to Hardware
•
The device will immediately display the serial number. Slide any credit card
through the MSR to view the data.

Testing the USB MSR Keyboard Emulation

Plug in the device.
1
Open MS Word.
2
Slide the card through the MSR to view the data.
3

Testing the USB-HID Class MSR

On the CD, browse to Touch Monitor Peripherals\Magnetic Stripe Card
1
Readers\Demo.
Open the Readme.txt and follow instructions to test the unit.
2
2-25