Installing The Usb Touch Driver; Installing The Usb Touch Driver For Windows 7, Windows Vista, Windows Xp, Windows 2000, Me And Windows 98 - Elo TouchSystems E700813 User Manual

Installing the USB Touch Driver

Installing the USB Touch Driver for Windows 7, Windows Vista, Windows XP,
Windows 2000, ME and Windows 98.
1 Insert the Elo CD-ROM in your computer's CD-ROM drive.
If Windows 2000 or Windows 98 starts the Add New Hardware Wizard, do the following: 2
Choose Next. Select "Search for the best driver for your device (Recommended)" and
choose Next.
3 When a list of search locations is displayed, place a checkmark on "Specify a location" and
use Browse to select the \EloUSB directory on the Elo CD-ROM.
4 Choose Next. Once the Elo USB touchscreen driver has been detected, choose Next again. 5
You will see several files being copied. Insert your Windows 98 cd if prompted. Choose
Finish.
If Windows 2000 or Windows 98 does not start the Add New Hardware Wizard, do the
following:
NOTE: For Windows 2000 you must have administrator access rights to install the driver.
1 Insert the Elo CD-ROM in your computer's CD-ROM drive. If the AutoStart feature for your
CD-ROM drive is active, the system automatically detects the CD and starts the setup
program.
2 Follow the directions on the screen to complete the driver setup for your version of
Windows.
If the AutoStart feature is not active:
1 Click Start > Run.
2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
3 Click Open, then OK to run EloCd.exe.
4 Follow the directions on the screen to complete the driver setup for your version of
Windows.
2-16 User Guide