Table of Contents
Advertisement
SOFTWARE UPDATES
The Si Compact software is updated via the USB port on the front panel. Details and special
instructions for any release will be included with the software release package however the
'normal' procedure is listed below for reference:
1. Unzip the files to a USB key in the root directory, you should have two files:
2. Switch the console off using the PWR ON/OFF' button.
3. Press and hold 'SYSTEM ON/OFF' button for approx 5 seconds, a SOFTWARE UPDATE
4. Insert your USB stick and then press the 'MENU' button.
5. Select the INFO.XML file using the adjust encoder, the 'LOAD' button at the bottom right
6. Press the 'LOAD' button. Software will begin loading.
7. Wait until both progress bars have reached 100%, and the 'tick' symbol has appeared
It is advised to perform a Factory Reset as described below.
RESET TO FACTORY DEFAULT
The following procedure will restore the console back to the factor y defaults.
NOTE: All settings cues and shows will be lost.
1. Starting with the console off, hold the POWER key for ~5 seconds until the console starts
2. Press the LR, MONO and FX1 keys together, this opens the update page.
3. Press the CLEAR SD CARD button on the touch screen.
4. Restart the console.
Soundcraft Si Compact User Guide 0311
Compact.bin
info.xml
screen shall appear.
of the touch screen window will appear when a valid selection is made.
to the right of each progress bar, before removing the USB stick.
49
Advertisement
Table of Contents
