Mounting The Engine; Installing The Switch - Seagull Models GROB TUTOR G115 Assembly Manual

GROB TUTOR G115
Elevator servo.
Throttle servo.
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm as same as picture below:
Loctite secure.
Nut.
Throttle servo arm.

INSTALLING THE SWITCH.

Install the switch into the precut hole in the
side, in the fuselage.
12
Rudder servo.
Adjustable Servo
connector.
Servo arm.
Elevator servo arm.
Rudder servo arm.
3/ 32" Hole.
Instruction Manual.
Trim and cut.
Switch.

MOUNTING THE ENGINE.

1) Position the engine with the drive washer
(110mm) forward of the firewall as shown.
110mm.
2) Use a pin drill and 2mm drill bit to drill a
small indentation in the mount for the engine
mounting screw.